Monday, January 26, 2009
FFC/FPC Breakout Board

While working on my camera timer project (currently pretty much done, waiting for me to figure out how to put it in a case) I ended up needing to get a smaller LCD display. The one I had been using was just too big for any reasonable case I wanted to use. I found one:


The smaller LCD comes with a flat flex cable, and a connector is needed to use it. Unfortunately, these connectors don’t work well for prototyping on a breadboard. For a while, I had soldered wires to the connector. That worked, but as soon as I tried to move anything around, wires broke off the connector and it was just generally a pain to work with. I searched around for a breakout board for them, but couldn’t find anything. So I decided to make my own.

FFC breakout board

Ordering from the least expensive place I could find to have the board made, I ended up with 40 of them. I have no need for so many of these, so I’m selling the extras. They are now available in the store. They are the only thing available at the moment. 🙂

ShareTweet about this on TwitterShare on Google+Share on FacebookEmail this to someone
Posted by alan to electronics at 4:54 pm PT | Link | Comments (5)
All content Copyright © 2002-2009 Alan Penner
Powered byWordPress, Penner Hosting and Superb Internet
Some Rights Reserved
Redistribution is permitted under the terms of
this Creative Commons License